Rinnai has certified the Ubbink® 3”/5” to 3”/3” Concentric to Twin Pipe Adaptor (Figure 1) and other venting equipment to be used with the optional PVC/CPVC twin pipe venting system for both natural and propane units.
Flueing - Rinnai
A maximum flue length of 9.0m and up to 3 x 90 degree bends makes the installation of an internal continuous flow model possible virtually anywhere
6 | Energysaver flue installation guide: 10848-C 03-15 Energysaver flueing guidelines All Rinnai Energysavers must be installed with an approved Rinnai Energysaver flue system. Approved flue components are detailed in this guide. Every Energysaver requires a flue system that will draw effectively and clear flue products safely under all
installing the Non-Return Flue heck Valve; the valve must be installed according to the exact instructions in this manual. Proper installation is the responsibility of the installer. When installation is complete, give all manuals related to the common venting installation (including this manual and the Rinnai Water Heater Installation
Each Rinnai INFINITY water heater is flued individually, refer flueing options diagram below. Please note The installation and flue component images throughout this guide refer to our current internal models only (HDi200 and EFi250). Please adapt the information as necessary if
There are many variables when it comes to the correct sizing of a Rinnai Common Flue System. The most critical is the total MJ input of all the gas water heaters and the total height of the flue.
FOT-151 - Rinnai FOT-151 - 4-1/2" - 9-1/2" Flue Manifold A Vent …
Use this flue manifold kit when venting your Rinnai Direct Vent Wall Furnace through an exterior wall that is 4 1/2 - 9 1/2 inches thick. This kit is included with Rinnai Direct Vent Wall Furnaces, and does not need to be purchased unless a replacement flue manifold kit is needed.
- Reviews: 8
Rinnai FOT-152 Vent Flue Manifold Kit, 9-1/2-Inch-15-3/4-Inch, …
Aug 4, 2011 · Rinnai FOT-152 B 9-1/2-Inch - 15-3/4-Inch Vent Flue Manifold Kit. From the Manufacturer. Flue manifold kit to be utilized with Rinnai direct-vent furnaces. The B vent kit fits walls that are 4-1/2 - 9-1/2-Inch thick.
- Reviews: 16
• Rinnai Energysaver space heater when correctly installed with Rinnai approved flue components are room- sealed appliances and no internal ventilation is required. • Rinnai Energysaver space heater is fan-assisted.
FOT-152 - Rinnai FOT-152 - 9-1/2" - 15-3/4" Flue Manifold B …
Use this flue manifold kit when venting your Rinnai Direct Vent Wall Furnace through an exterior wall that is 9-1/2" - 15-3/4" thick. Question? Call or text 888-757-4774.
- Reviews: 10
- Some results have been removed