Note: The flange types shown are only a small part of the range covered in BS EN 1092-1. The Facings shown are type B (Raised Face). Other Facings include: Key: = Standard No/Flange Type & Face Type / Nominal Size/ Pressure Rating/*/ Material Designation. * Normally not used.

b According to 1092EN -2 (Cast iron flanges) and 1092-3 EN(Copper alloy flanges), the flanges in this DN and PN may be supplied with 4 holes. Where steel flanges are required with 4 holes, these may be supplied by

Generally, a PN16 flange is designed to withstand pressures up to 16 bar. This article gives advise and guidance on British Standard PN16, Australian Standard, American National Standards Institute Flange Information for flanged valves.

Dimensions of PN 16 Flanges DIN EN 1092-1. NOTE 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange. NOTE 2: For d1 dimensions see document "Flange facing according to DIN EN 1092-1". Dimensions in mm

Table with dimensions of PN16 Vorschweiss-Flansche (Weld Neck) Type 11 DIN EN 1092-1 incl. dimensions of Hex Bolts and Stud Bolts for that type of flanges

Dimensions of PN 16 Flanges DIN EN 1092-1 NOTE 1 : Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange.

May 31, 2023 · Dimensions and weights of PN16 Blind Raised Face DIN Flanges from DN10 to DN1000 as per EN 1092-1. All dimensions are in mm unless noted otherwise.

AS4087 PN16 flange specifications cover nominal pipe sizes from 50mm (2") to 1200mm (48"). Available in blind and slipon configurations.

Dimensional table of DIN EN-1092-1 PN-16 Steel Pipe Flange.

BSEN1092 PN16 flange specifications cover nominal pipe sizes from 10mm (3/8") to 600mm (24") with additional sizes available up to 2000mm. The table includes flange outside diameters ranging from 90mm to 840mm, with thicknesses from 14mm to 55mm.