Apr 9, 2011 · OP, I would think you could just run the SSR's with a jumper line between the two + posts from the PID, and put a toggle switch between the two SSR's so the other one is "dead" to the PID. PID + to SSR 1, Jumper to toggle switch, toggle switch to SSR 2 +.

Oct 23, 2018 · After many requests, I finally have enough time to do a write-up on this. It is my single element, 110v PID controller that I use on my eBIAB setup. Credit goes to jkarp because I made mine from his original Countertop Brutus 20 Thread. Parts needed: Enclosure: (1) 6x6x4 WP Box. (I am...

Oct 13, 2021 · You cannot control boil vigor with a PID, as it does not run with a fixed output, but rather continuously adjusts output to maintain a target temperature. You need a controller that allows you to manually set a fixed output, that gives you the desired boil vigor, since boiling happens at a fixed temp (depending on barometric pressure and liquid ...

Nov 17, 2018 · apart form the core temperature control features (PID/PWM etc..) indeed very advanced and powerful t the main innovation I have introduced that make SmartPID unique are Full process automation Thanks to the power of the platform it's possible to develop custom application that needs process control with complex service logic and manage a ...

Mar 9, 2017 · The last time I checked, no one had quite figured out to get manual output control on an ITC-106. I stumbled on it today, and wanted to share my findings: To go into Manual Output mode: With the PID in auto mode, depress the left arrow ("AT/RUN") button for a few seconds. The "RUN" indicator on the display will illuminate.

Jan 8, 2015 · I'm fairly new here and have been doing a lot of reading. My next step in equipment is to use an induction cooker/hot plate and i want to control it with a PID. The cooker i'm looking at is the Avantco 3500w, 220v countertop cooker. I don't own this cooker yet, but it's the one i'm leaning toward now.

Jun 12, 2008 · I'm getting ready to start my electric control Box for an e-herms system. I have purchased the Auber SYL-2362 PID with an ebay SSR to control the 5500w element in the BK. Late in my planning I decided to add a Love TS2 to do a simple on/off temp control for the 1500W element in the HLT. I have already been using a Ranco to control the HLT, and ...

Apr 5, 2017 · Seriously though, PID tuning with fast moving stuff is critical. However, I could never get the PID to work well for direct sparging. But since the flow rate and liquid temperature is consistent, there is really no reason to use PID. I have been using Duty Cycle (PWM or manual mode depending on who named it) for a long time with great success.

Nov 22, 2010 · I've implemented PID and limited-output PID for an inline heater (RIMS), and PID and manual control for my boil kettle. I also have software blocking and alerts to prevent me from firing two elements at once (there is some hardware control for this as well, don't fear), since my panel feed isn't capable of running 2 5500watt elements at once.

Jan 17, 2014 · Auber 2352 PID 25A SSR with internal heat sink 2x Selector Switch, 2-Position Maintained 2 NO with LED indicator (one for PID, one for element) Flashing buzzer, 110v AC for temperature alarm 15A receptacle 15A GFCI outlet (for element) Terminal strips Brew Hardware RIMS tube Element: Camco 02932/02933 5500W 240V Foldback, Ultra Low Watt Density ...