Mar 26, 2017 · I don't have a Fanuc simulator but I do have a Mitsubishi M70 simulator on my laptop and the code runs just fine. This (I feel) is a control issue. I would try disabling the horizontal and vertical radius lead ins and use a perpendicular linear lead-in to pick up the comp and increase the lead-in value to at least .100".

Aug 20, 2018 · Hi I was running a program (laser cutting portraits on metal) I did the design on photoshop and then traced it on illustrator and export it to autocad in order to put it on my laser amada machine AP100 fanuc 160i-L and cut it.

Oct 14, 2020 · Hello, my problem concerns the forward speeds, in detail I would like macros to be applied to the speeds as in example.

Jun 16, 2020 · I have been tweaking the generic Fanuc Turning Post from the Fusion Post Library to work with my 1996 Clausing Colchester Storm 100A 2-axis lathe with Fanuc O-T C Control. My machine only seems to have a G74 drill cycle and I have gotten my post to output a good format for this, but now I have a dubious problem where the second drill cycle ...

Aug 18, 2022 · I require a post processor for fanuc oi-TF plus controller category B. Generic fanuc turning post does not give a proper output. I want to use it on Ace micromatic J300LM cnc turning center.

Jun 1, 2017 · The machine that will be running the part will be a Doosan Puma 2600Y. I have had a look through the Autodesk post library & I can find a "Doosan Mill/Turn with Fanuc 31i control " post, but I doubt this will work as the machine isn't running 31i Fanuc. (It is running Fanuc i …

Jul 23, 2020 · Hi everybody , i'm using an old CNC machine since 1989 with fanuc OM controller. I have a trouble with post processor for olds machine of my shop , it took me a lot of time to edit CNC program by replace or edit unnessary g code and m code , so i'm very tired. I watched video tutorial to edit post but it's complicated to understand it .

Sep 17, 2018 · Yes, the "Fanuc w/Inverse Time and A axis" post is the one you want to be using. You will need to set your WCS to centerline of rotation. If you plan on doing anything complex involving multiple work offsets (such as vise work) you will need to have your post edited to perform correctly

Feb 9, 2016 · Fanuc doesn't care if you turn it off before a G05.1 Q0. So with what OP shows the G49 before G05 .1 Q0 is just plain dangerous and unnecessary. As long as tool length compensation isn't active before you turn G05.1 on it doesn't care about what happens after.

Jul 30, 2018 · here is a fanuc post processor with 4th axis enabled. I have been using this post for a while now and it works great. Figured i would share with the community