FOS-FLO - Lucas Milhaupt
Fos-Flo is an alloy for copper-copper brazing or copper to other base metals where critical impact or vibration stresses are not encountered in service.
Fos-Flo is a low cost brazing filler metal suitable for joining copper to copper and copper to copper alloys where critical impact or vibration stresses are not encountered in service. It should only be used on assemblies where good fit-up can be maintained.
Fos-Flo - Johnstone Supply
Johnstone Supply is a leading wholesale distributor for HVACR equipment, parts and supplies available and in-stock at local branches.
0.125" Fos-Flo 7 Copper Brazing Rods - 1 Lb Tube
Use Fos-Flo 7 brazing rods to join copper, brass, and bronze products. This non-silver brazing alloy is ideal for general purpose brazing on well-fitted joints.
95000 - Fos Flo 7 .050" X .125" X 20" Rods X 1#/Tube
An economical, very fluid medium temperature filler metal for use with copper, brass and bronze. Withstands moderate vibration. Recommended joint clearance: .001" to .003" (.025 mm to .076 mm). Fast Flow.
FOS-FLO® Datasheet - Lucas Milhaupt Global Brazing Solutions
Applications / Materials Joined: Copper; Joining Process / Product Form: Braze or solder in the form of a paste.; Powder; Solid wire or rod; Nominal Composition: 92 ...
Sil-Fos Brazing Alloys Fos-Flo® 7 - 78304
Fos-Flo® 7. Type FOS-FLO Liquidus 1460 °F, 793 °C Solidus 1310 °F, 710 °C AWS BCuP-2 Length (in.).125x.050x20:28 rods Composition Copper 92.75,Phosphorous 7.25. Item #: 78304 Brazing copper to copper/copper to copper alloys; Used …
Brazing Alloy, Lucas Milhaupt, Fos-flo, 1 Lb. Tube - tzsupplies.com
Fos-Flo For Joining Copper and Copper-based Alloys. AWS Specs: BCuP-2 .125" x .050" x 20" Long 1 lb. tube For joining copper to copper without a flux and copper based alloys (brass and bronze) with a flux.
Lucas Milhaupt 95000 Fos-Flo Brazing Rods - Package of 28
Fos-Flo is a low cost brazing filler metal suitable for joining copper to copper and copper to copper alloys where critical impact or vibration stresses are no encountered in service. It should only be used on assemblies where good fit-up can be maintained.
Sil-Fos® family of brazing alloys For joining copper and copper-based alloys . This group of alloys allows the joining of copper to copper without a flux and copper based alloys (brass and bronze) with a flux . The family of products includes the original Sil-Fos 15 . Developed and patented over 75 years ago, Sil-Fos is the workhorse filler metal
- Some results have been removed