Material: Carbon Steel, Stainless Steel, Spring Steel; Specifications: M8-M200; Length: 8.7-209mm; Surface Treatment: Anode Oxidation, Zinc Coating, Dacromet, Polishing.

Axially fitted snap rings designed for use with roller bearings. The grooved bearings conform to DIN 616. The application of roller bearings with snap rings gives the advantage of a smooth-bored housing and a shorter overall axial length. Standard material: Carbon Spring Steel – Standard Finish: Phosphate and Oil.

SEEGER circlips to DIN 5417 for shafts are designed for securing roller bearings in whose outer race a groove has been cut. Roller bearings to DIN 616 are mass-produced by manufacturers.

In our on-going quest for innovation, and excellence in customer service, we were the first to supply product stacked, gap aligned and shrink wrapped for automatic assembly. Circlips ( also commercially known as Retaining Ring / Snaprings) are fasteners with numerous applications.

For connection with DIN 616 and 464, see Explanations. This Standard specifies the dimensions of snap rings required for securing bearings with ring groove according to r r

DIN 5417 SP series snap rings made from spring steel, 65Mn, size from 10mm to 300mm or 1/2

DIN 5417 SP Series Snap Rings Material: Spring Steel – 65Mn Standard: DIN 5417 Hardness: HRC41-HRC49 Size: 7.0mm – 300mm

SEEGER circlips to DIN 5417 for shafts are designed for securing roller bearings in whose outer race a groove has been cut. Roller bearings to DIN 616 are mass-produced by manufacturers.

This Standard specifies the dimensions of snap rings required for securing bearing with ring groove according to DIN 616, diameter series 0, 2, 3 and 4. (Log in to download spec.) Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps.

This standard specifies dimensions and designations for snap rings which are necessary for securing radial bearings with ring groove according to DIN 616, mainly for the diameter series 0, 2, 3 and 4.